Products

Zero-Emission Piaggio Electric Carts For Urban Coffee And Food Delivery

Qingdao Tune Technology Co., Ltd. builds Piaggio Electric Carts at its 4,500-square-meter production site in Shandong, China. This is a battery-electric three-wheeled vending vehicle for coffee, fast food, and beverage service. It produces no tailpipe emissions and runs under 50 dB, so it can operate in low-emission zones, indoor trade halls, and noise-restricted sites. The petrol version shares the same body style and is covered under Piaggio APE Cart. Full-size self-propelled kitchens are listed under Food Truck.

Powertrain and Battery

The drivetrain uses a 72V 5kW brushless DC motor with regenerative braking and 95 Nm of torque. Maximum payload is 600 kg. Energy is stored in a 72V 150Ah LiFePO4 battery pack managed by a smart BMS with cell balancing and thermal overload protection. Driving range is 90 to 110 km per charge. An onboard 3kW pure sine wave inverter draws from the main battery to run POS terminals, LED lighting, and low-draw refrigeration for over 10 hours without grid power. Optional roof-mounted 400W monocrystalline solar panels connect to an MPPT controller for trickle charging during daylight.

Body and Cargo Volume

The Piaggio Electric Commercial Vending Truck uses a rear body measuring 2,100 mm long, 1,450 mm wide, and 1,500 mm high. Internal volume is about 4.5 m³. This space can hold multi-tier display shelves, a commercial espresso machine, and under-counter refrigeration. The layout is planned around the operator’s working position so equipment can be reached without stepping outside the vehicle.

Fast Food Configuration

The Piaggio Side-Opening Fast Food Van uses dual side hydraulic gas-strut hatches that open to 85 degrees. When open, they create a 2,200 mm wide service counter with integrated LED canopy lighting. The prep area includes continuous 304 food-grade stainless steel counters, a dual-basket electric deep fryer, a 500 mm flat-top electric griddle, and a 1,500 m³/h stainless steel exhaust hood. Two line cooks can process up to 90 hot food orders per hour in this layout.

Chassis and Safety

The chassis combines TIG-welded 6061-T6 aluminum alloy members with a hot-dip galvanized steel subframe. The wheelbase is 1,980 mm with a 3.8-meter turning radius, which allows the cart to move through narrow alleys and tight parking areas. Front suspension uses independent MacPherson struts. The rear uses heavy-duty leaf springs with hydraulic shock absorbers. A dual-circuit hydraulic four-wheel braking system with electronic parking locks holds the vehicle on inclines during vending.

Electrical and Plumbing

An IP67 waterproof electrical sub-panel supports 110V or 220V shore power input with a 32A main breaker and RCD earth-leakage protection. Wiring runs through flame-retardant corrugated conduit to waterproof counter outlets and internal LED ceiling fixtures. The plumbing assembly includes a 304 stainless steel double-basin sink, a 12V DC pump delivering 3.8 GPM, a 10L electric water heater, and dual 30L food-grade polyethylene freshwater and greywater tanks. Where a municipal water connection is available, the cart can be plumbed directly.

Where Piaggio Electric Carts Are Used

The zero tailpipe emissions and quiet drive allow placement inside zero-emission pedestrian zones, historic city plazas, botanical gardens, trade show halls, indoor sports stadiums, and airport terminals. Eco-resorts and university campuses use them for room service refreshments and mobile retail. Because there is no exhaust, indoor venues do not need to install ventilation infrastructure for the vehicle itself.

Quality Control and Warranty

Before shipment, each cart completes a 40 km test track drive under a full 600 kg payload to evaluate motor thermal stability, battery discharge curve, and braking deceleration. Battery packs undergo high-potential dielectric insulation testing and UN38.3 transport safety certification. The commercial body goes through a 24-hour continuous 50 PSI rain chamber spray audit to check service hatches and door seals. After approval, the unit is wrapped in protective foam and secured on heavy-duty steel ocean export skids. TUNE provides a 12-month structural factory warranty, CE vehicle compliance documents, electrical schematics, and a BMS operation manual.

Certifications and Third-Party Inspection

Piaggio Electric Carts can be supplied with CE, ISO 9001, DOT, EPR, COC, and NSF-aligned documents where required. TUNE holds Alibaba Gold Supplier status and has completed regular third-party inspections by SGS and Intertek. Certificate numbers, scope, and validity can be provided before ordering.

EPR certification for Piaggio Electric Cart COC certificate for Piaggio Electric Cart conformity

FAQ

Q: What is the driving range on a full charge?
A: Range is 90 to 110 km, depending on payload, terrain, and how much onboard equipment is running. The battery is a 72V 150Ah LiFePO4 pack.

Q: Can it run appliances without shore power?
A: Yes. The onboard 3kW pure sine wave inverter draws from the main battery and can run POS terminals, LED lighting, and low-draw refrigeration for over 10 hours. High-draw cooking equipment is usually run on shore power or a generator.

Q: Is it allowed indoors?
A: The electric drivetrain produces no exhaust and runs under 50 dB, so it is often permitted in trade halls, airports, and malls. Check local fire and food service rules for indoor cooking and battery charging.

Q: How long does charging take?
A: Charge time depends on the charger and remaining battery capacity. A full charge typically takes several hours. The BMS manages cell balance and thermal limits during charging.

Q: What after-sales support is included?
A: TUNE offers a 12-month structural warranty, remote technical support, and shipment of common spare parts such as pumps, faucets, brake components, and electrical switches. Specific terms are stated in the contract.

View as  
 
Piaggio Side-Opening Fast Food Van

Piaggio Side-Opening Fast Food Van

TUNE Factory Piaggio Side-Opening Fast Food Van combines a covered three-wheel cabin with a spacious rear vending body, wood-look service counter, lockable storage doors and a 1,500W motor powered by a 60V 45Ah lithium battery. With a customizable wood or stainless-steel finish, it suits drinks, snacks, desserts, events and private-site retail.
Piaggio Electric Commercial Vending Truck

Piaggio Electric Commercial Vending Truck

TUNE Factory Piaggio Electric Commercial Vending Truck features a fully enclosed three-wheel cabin, 1,500W motor, 60V 45Ah lithium battery, stainless-steel service counter and lift-up vending hatch. Its 3150 × 1400 × 1850 mm structure supports customizable food, beverage and promotional applications with a one-year warranty.
Tune Technology is a professional Piaggio Electric Carts manufacturer and supplier in China, with experienced sales, technical, and after-sales teams supporting global customers from design to delivery.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept