Piaggio Electric Commercial Vending Truck

The TUNE Piaggio Electric Commercial Vending Truck is an eco friendly piaggio food van developed as a compact electric vending platform that combines a covered driving cabin with a rear commercial service compartment. As a mobile vending truck manufacturer, Qingdao Tune Technology Co., Ltd. produces this electric piaggio ape vending truck and black electric food cart vehicle for distributors, event rental companies, resort operators and mobile retail businesses.

Qingdao Tune Technology Co., Ltd. was founded in 2015 and operates a manufacturing facility of approximately 4,500 square meters in Shandong, China. TUNE products are exported to more than 50 countries, with North America accounting for approximately 60% of sales and Europe approximately 25%. Production follows ISO 9001 quality management, and applicable configurations carry CE, DOT, EPR and COC documentation. Third-party inspections are conducted by SGS and Intertek.

The visible configuration includes a black enclosed body, front windshield, side windows, exterior mirrors, front lighting, rear lamps, a single front wheel and two rear wheels. This arrangement gives the operator a protected driving position while maintaining a clear customer-facing work area.

The rear service body is designed with a large lift-up hatch, gas-support struts, stainless-steel work surfaces and multiple lower storage doors. The open hatch creates a sheltered service opening and provides a practical separation between the operator’s work area and the customer side. The internal wall includes several electrical switch positions, allowing the final equipment layout to be organized around the buyer’s selected appliances and operating method.

The standard specification identifies a 1,500W motor and a 60V 45Ah lithium battery. Driving range, maximum speed, payload and charging time are confirmed separately because these values depend on final weight, road conditions and optional equipment.

Product Structure and Material Choices

Enclosed driving cabin

The front cabin uses a curved windshield, windshield wiper, side windows, mirrors and enclosed body panels. This design is useful for operators working in locations where wind, dust or light weather exposure is a concern. The actual level of weather protection depends on door seals, operating conditions and local climate. The black exterior provides a neutral base for company logos, delivery branding, seasonal graphics or color accents.

Stainless-steel service area

The rear counter and lower storage doors are shown with a stainless-steel finish. Stainless steel is commonly selected for service surfaces because it is relatively easy to wipe down and suitable for frequent cleaning when the correct grade and fabrication method are specified.

The counter is configured for:

● Bottled drinks and packaged food

● Coffee and takeaway beverage service

● Ice cream and dessert sales

● Juice or cold-drink preparation

● Promotional samples

● Light catering at events

● Mobile retail and product display

For hot cooking, refrigeration, water supply or food preparation, the final design includes suitable ventilation, electrical capacity, drainage, heat protection and hygiene provisions.

Optional wood or stainless-steel body finish

The product specification allows wood or stainless steel as material options. Wood-style finishes create a warmer retail appearance for coffee, dessert, lifestyle or boutique brands. Stainless steel suits buyers prioritizing wipe-clean surfaces and a commercial equipment appearance. The selected material, thickness, surface treatment, edge design and cleaning requirements are recorded before production.

Production Process

Requirement review: confirm product category, destination market, operating site, electrical standard, service workflow and expected equipment.

Technical drawing: approve the body dimensions, service hatch, counter height, storage arrangement, cable routes, lighting and battery position.

Chassis preparation: install the three-wheel running structure, steering components, suspension-related parts, wheels, brakes and electric drive components.

Body fabrication: form and assemble the enclosed cabin, rear service cabinet, access doors and lift-up hatch. Check panel alignment before surface finishing.

Surface treatment: complete welding cleanup, polishing, coating or exterior finishing. Inspect the black body surface for visible defects, uneven coating and edge damage.

Electrical installation: connect the motor system, lithium battery, controller, charger interface, lights, switches and optional appliance circuits.

Functional inspection: test steering, braking, lights, hatch supports, doors, electrical switches, battery connection and charger compatibility.

Packing and handover: confirm accessories, operating instructions, spare parts, inspection records and shipping protection before dispatch.

Main Technical Data

Engineering Data

The following data is available for project review and is confirmed according to the final configuration:

Certification and Compliance Information

Certification requirements for an electric vending vehicle vary by country and involve different parts of the product, including vehicle registration, electromagnetic compatibility, low-voltage electrical safety, battery and charger safety, lighting and signaling equipment, food-contact materials, fire and ventilation provisions, and local vending and hygiene permissions.

TUNE prepares a documentation list according to the destination market, and the applicable approval route is confirmed before the order is finalized. If a buyer requires CE-related documents, battery transport documents, EMC test information or other compliance materials, the exact document name and responsible issuing party are stated in the contract.

CE marking — applies to applicable electrical configurations of the vehicle.

ISO 9001 — covers the factory quality management system at the Shandong production facility.

DOT documentation — relates to confirmed transport configurations for the destination market.

Certificate numbers, issuing bodies and product scope are supplied with the final order documents.

Lithium Battery Quality Checks

The lithium battery is identified by model, rated voltage, rated capacity, connector, charger and installation position. During inspection, the buyer requests confirmation of the battery label, 60V rating, 45Ah capacity marking, charger output compatibility, connector condition, cable insulation, protection from movement and impact, controller connection, charging response, and storage and operating instructions.

The final driving range is evaluated using a defined test condition, including total load, road surface, ambient temperature and speed.

Suggested Configuration Examples

Beverage service

Use the stainless-steel counter for cups, lids, bottled drinks and a compact dispensing system. Any refrigerator, ice maker, pump or water tank is reviewed for electrical demand and available storage space.

Coffee station

Reserve the lower cabinets for cups, beans, packaging and cleaning materials. A coffee machine requires a dedicated power calculation, ventilation review and stable counter support.

Ice cream point

Use the rear compartment for packaged products and service supplies. A freezer is added after confirming dimensions, heat dissipation, power consumption and battery impact.

Event promotion

Use the black exterior as a background for high-contrast branding. The lift-up hatch creates a clear service window for product sampling, campaign materials or temporary retail operations.

Pre-Delivery Inspection List

Before shipment, the Black Electric Food Cart Vehicle is checked against the approved technical sheet:

1. Overall dimensions and body size

2. 1,500W motor identification

3. 60V 45Ah lithium battery label

4. Charger and destination plug standard

5. Steering response and front-wheel alignment

6. Brake operation and pedal or lever response

7. Headlamps, rear lamps and switches

8. Windshield wiper and cabin fittings

9. Hatch lifting and gas-strut support

10. Storage-door opening and locking

11. Stainless-steel counter installation

12. Body-panel alignment and black coating

13. Cable routing and electrical insulation

14. Packaging protection and included accessories

A signed inspection sheet records the test date, configuration, observed result and any agreed corrective action.

Frequently Asked Questions

Can the vehicle be customized?

Yes. TUNE discusses exterior color, logo placement, service-counter material, storage layout, electrical outlets, water systems, refrigeration and selected vending equipment. Custom options are confirmed for compatibility with the battery, body structure and available space.

Is the battery lithium?

Yes. The listed configuration uses a 60V 45Ah lithium battery. The charger, connector and battery protection system are confirmed for the destination market.

What is covered by the warranty?

The stated warranty period is one year. The final contract defines coverage separately for the chassis, body, motor, controller, lithium battery, charger and optional equipment, including exclusions caused by misuse, unauthorized modification or improper maintenance.

Can this vehicle operate on public roads?

That depends on local legislation. Registration, driving authorization, road equipment, insurance and vending permissions are checked in the intended market before operation.

Is the stainless-steel area suitable for food preparation?

The stainless-steel counter is suitable for service and display applications. Food preparation requirements depend on the selected material grade, equipment, drainage, cleaning system and local hygiene regulations.

Warranty and After-Sales Support

The product is supplied with a one-year warranty from the date of shipment, unless otherwise stated in the sales contract.

Warranty exclusions cover damage caused by improper operation, overloading, unauthorized modification, transportation, normal wear, corrosion, consumable parts, third-party equipment, incorrect voltage or force majeure events.

If a manufacturing defect appears, the buyer provides the model, serial number, delivery date, invoice reference, photos or video and a description of operating conditions. TUNE reviews the information and provides replacement parts, repair guidance, on-site support or another solution confirmed in the sales contract.

Technical support is provided by TUNE engineering staff through email, video call or written instructions. Spare parts include tires, brake components, motor controller parts, battery charger, lighting modules, gas struts, door hardware and electrical connectors, subject to stock and shipping arrangement.

The purchase agreement includes final dimensions, motor and battery specifications, charger details, body materials, customization drawings, equipment list, inspection method, delivery terms and one-year warranty conditions. TUNE provides operating guidance, maintenance information, configuration confirmation and replacement-parts support according to the agreed scope.

The electric piaggio ape vending truck is specified as a complete working system rather than as a body alone. When the vehicle structure, lithium battery, electrical load, service workflow and local compliance requirements are reviewed together, the buyer receives clearer information for installation, operation and future maintenance.